The amount of available memory needed to use the CrashPlan app increases with the size of your archive or backup file selection. If your backup selection exceeds 1 TB of storage or 1 million files, you can increase the maximum amount of memory the CrashPlan app is allowed to use by following the steps below.
Alternatively, if your computer has memory limitations, you can adjust several CrashPlan settings to reduce the amount of memory required for your backup.
CrashPlan backup selections exceeding 1 TB of storage or 1 million files.
CrashPlan uses memory up to the maximum allotted. The maximum is used only if it is needed.
Code42 typically recommends allocating 1 GB (1024 MB) of memory per 1 TB of storage (or per 1 million files). Although CrashPlan only requires approximately 600 MB of memory per 1 TB of storage (or per 1 million files), our recommendation is intended to account for growth in your file selection.
If you uninstall and reinstall the CrashPlan app after increasing allocated memory, the setting will revert back to the default value of 1024 MB.
|Backup selection size||Recommended memory allocation (MB)|
|Up to 1 TB or up to 1 million files||1024 (default)|
|1.5 TB or 1.5 million files||1536|
|2 TB or 2 million files||2048|
|2.5 TB or 2.5 million files||2560|
|3 TB or 3 million files||3072|
You should not allocate more memory to CrashPlan than the maximum supported by your computer. For example, if your computer has 8 GB of RAM, you shouldn’t allocate more than 8 GB (8192 MB) to CrashPlan.
You can use the CrashPlan app's manual commands to increase the default memory from 1024 MB to a maximum that supports your archive size.
- Open the CrashPlan app
- Double-click the CrashPlan logo in the upper-right corner
- Enter the following command, using a value appropriate for the size of your backup selection (for example, 1536 for a 1.5 TB selection):
java mx 1536, restart
- Open the CrashPlan app and sign in
CrashPlan only uses the maximum memory allotted if it is needed. However, if the maximum memory supported by your computer does not accommodate the size of your backup file selection, there are several alternative ways to reduce memory usage.
Remove system and application files from your backup selection
CrashPlan is designed to back up personal files (e.g., photos, documents, music, etc.). It is not designed to back up your operating system or application files. When system and application files are included in your backup file selection, CrashPlan expends additional resources, like memory, backing up these files. It's truly wasted effort because CrashPlan isn't designed to help you recover your operating system or applications. Review our guidelines for choosing what to back up for additional information.
Reduce backup frequency
CrashPlan monitors changes to files in real time based on your backup frequency and versions settings. More frequent backups or large numbers of files require the CrashPlan app to use more system resources to process your backup. You can reduce the frequency of the New Versions scan to conserve memory.
Real-Time File Watching
Real time file watching can be disabled from the CrashPlan app under Settings > Backup > Advanced settings to further reduce memory usage. However, by turning this setting off, your files only back up after running a verification scan. Real-time file watching is recommended for ensuring your most recent changes are backed up in a timely manner.
Reduce CPU allocated to CrashPlan
You can control the CPU CrashPlan is allowed to use both when you are present (working on your computer) and away. You can adjust these settings from the CrashPlan app under Settings > General. While most modern computers can support allowing CrashPlan to use a high CPU percentage without experiencing any performance issues, you may want to adjust these settings for older computers.
Finally, if you are still experiencing performance issues related to memory, you can configure CrashPlan to back up only at specified times. You can adjust your backup schedule from the CrashPlan app under Settings > Backup > Backup will run. However, be careful to set a schedule that allows CrashPlan to run while your computer is on and not in standby mode.
Reduce your file selection
If you experience issues related to CrashPlan's memory usage after adjusting the settings described above, you may need to remove files from your selection to reduce the amount of memory needed to run the CrashPlan app.
Removing files from your backup file selection permanently removes them from your backup archive. You cannot restore files that have been removed from your backup file selection.